How To Use Meguiar’s Cleaner Wax Liquid [3 Steps Process]

How To Use Meguiars Cleaner Wax Liquid

If you buy something through our links, we may earn a commission

It’s not easy to maintain the beauty of your beloved vehicle, especially if you’re a busy person. The outer surface of your car will collect dirt, stain, and scratches that you can’t remove through regular washes only. Luckily, there are many cleaner waxes, pastes, and polishes available nowadays to handle all such problems.

If you want to keep your car surface clean and protected, Meguiar’s cleaner wax liquid is undoubtedly the most convenient option for you. While most people easily pick it up from Walmart, many of them don’t know how to use Meguiar’s cleaner wax liquid properly.

Here will tell you the correct method of applying the product so that you can keep your vehicle clean and glossy forever. Let’s get started.

How To Use Meguiar’s Wax Liquid Cleaner – Step by Step

Well, the bottle you have purchased surely says it’s a simple one-step process to apply the product, and you can count on that.

In our guide, we will cover every little detail so that you can get the best results out of the cleaner. So, follow all the given steps to bring back the shine of your car. 

Here’s how to use cleaner wax

Step 1) Wash Your Car

Many people tend to skip this step, thinking the wax cleaner will do everything needed for their cars. While this understanding is true for minor scratches and swirls, you’ll have to remove the dirt, water spot etching, minor blemishes, and other stains fully before applying the cleaner.

Remember that the wax cleaner won’t be able to clean deep stains and blemishes. It would rather hide those stubborn marks for a short period only. So, take your vehicle for a nice bath at some car wash or do it yourself at home.

After washing, let the car sit and dry under the bright sun. It’s important to completely dry the surface to achieve the best outcome.

Step 2) Apply The Wax Cleaner

Now it’s time to apply the product. Move your car to a shaded area, far from direct sunlight. The Meguiar’s cleaner might or might not come with an applying pad. If your package doesn’t include a suitable applicator, you can apply the cleaner with any foam applicator pad.

Otherwise, a simple thick piece of cloth will also do the work for you. Check out the package and look for instructions on how much product you should apply at a time. Typically, a small amount of liquid wax is enough to cover a fairly large area.

Apply the product to the pad and proceed to the next step.

Step 3) Work On A Small Area

Instead of using the cleaner on a whole surface, try to work on a small area first. This will make sure that the cleaner is distributed equally on every corner. Gently rub the foam pad against your car surface and slowly cover the whole area.

When you’re done, leave the wax on the surface and wait until it’s set. Usually, it won’t take more than 10 minutes. If you’re able to make a clean and dry swipe using your finger, you can buff off the residue. Use a clean towel to wipe out the residue to reveal a slick, smooth, and glossy surface. In fact, you should be able to see your face on that clean surface. How cool is that?

FAQ

Conclusion

So now you know how to use the cleaner wax liquid. Follow our instructions properly to get the cleaner applying job done conveniently.

Keep in mind that you can achieve the best results even if you use a small amount of cleaner. If you have any further confusion, read the package instructions properly or visit Meguiar’s manufacturer website.

Read more:

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top